Appendix A Safety Instructions; Safety Instructions - AXIOMTEK ICS-480V User Manual

ICS-480V 4U Industrial Workstation with 8.4" LCD and 14 slots
backplane User's Manual
a. The power cord or plug is damaged.
b. Liquid has penetrated into the equipment.
c. The equipment has been exposed to moisture.
d. The equipment does not work well, or you cannot
get it to work according
to the user's manual.
e. The equipment has been dropped and damaged.
f. The equipment has obvious signs of breakage.
15. DO NOT LEAVE THIS EQUIPMENT IN AN ENVI-
RONMENT WHERE THE STORAGE TEMPERATURE
MAY GO BELOW -20° C (-4° F) OR ABOVE 60° C
(140° F). THIS COULD DAMAGE THE EQUIPMENT.
THE EQUIPMENT SHOULD BE IN A CONTROLLED
ENVIRONMENT.
Th sound pressure level at the operators position
according to IEC 704-1:1982 is no more than 70dB(A).
DISCLAIMER: This set of instructions is given
according to IEC 704-1. AXIOMTEK disclaims all
responsibility for the accuracy of any statements
contained herein.
16. Any insulation on conductors inside EQUIP-
MENT which connect ACCESSIBLE METAL PARTS
or other PROTECTIVELY EARTHED parts with a
protective function to the PROTECTIVE EARTH
TERMINAL shall be identified by the colrs green
and yellow at lease at the termination of the
conductors.
17. CAUTION: The computer is provided with a
Battery-powered Real-Time Clock Circuit. There is
a danger of explosion if battery is incorrectly
replaced. Replace only with same or equivalent
typed recommended by the manufacturer.
Discard use batteries according to the
manufacturers instructions.
18

Safety Instructions