AXIOMTEK GOT5153W-845 User Manual
  1. Manuals
  2. Brands
  3. AXIOMTEK Manuals
  4. Desktop
  5. GOT5153W-845
  6. User manual

AXIOMTEK GOT5153W-845 User Manual

All-in-one 15.6” wxga tft fanless touch panel computer with intel celeron processor n3060 onboard
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
GOT5153W-845
All-in-One
15.6" WXGA TFT Fanless Touch Panel
Computer with Intel® Celeron® Processor
N3060 onboard
User's Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the GOT5153W-845 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for AXIOMTEK GOT5153W-845

Summary of Contents for AXIOMTEK GOT5153W-845

  • Page 1 GOT5153W-845 All-in-One 15.6” WXGA TFT Fanless Touch Panel Computer with Intel® Celeron® Processor N3060 onboard User’s Manual...
  • Page 2 Axiomtek does not make any commitment to update the information in this manual. Axiomtek reserves the right to change or revise this document and/or product at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of Axiomtek Co., Ltd.

  • Page 3: Safety Precautions

    Disconnect the power cords from the GOT5153W-845 Series before making any installation. Be sure both the system and the external devices are turned OFF. Sudden surge of power could ruin sensitive components. Make sure the GOT5153W-845 Series is properly grounded.

  • Page 4: Table Of Contents

    Table of Contents Disclaimers ..................... ii Safety Precautions ..................iii Chapter 1 Introduction ..........1 General Description ................2 Specifications ..................3 Dimensions ..................5 I/O Outlets .................... 7 Packing List ..................9 Chapter 2 Hardware and Installation ....11 SBC87845 Jumpers and Connectors..........
  • Page 5 System ....................47 Touch Screen ..................48 4.2.1 Specification ....................48 Embedded O.S................... 49 4.3.1 WES 7 & WE8S ..................49 Appendix A Watchdog Timer ........51 About Watchdog Timer ................51 How to Use Watchdog Timer ............... 51 WDT Sample Program .................
  • Page 6 This page is intentionally left blank.

  • Page 7: Chapter 1 Introduction

    GOT5153W-845 User’s Manual Chapter 1 Introduction This chapter contains general information and detailed specifications of the GOT5153W-845. Chapter 1 includes the following sections:  General Description  Specifications  Dimensions  I/O Outlets  Package List Introduction...

  • Page 8: General Description

    GOT5153W-845 User’s Manual General Description The GOT5153W-845 is a fan-less and compact-size touch panel computer, equipped with a 15.6” TFT LCD display, 5W flat resistive touch or project capacitive multi-touch for option and low power consumption Intel® Celeron® Processor N3060. The GOT5153W-845 supports Windows 7, Windows 8.x and Windows embedded OS.

  • Page 9: Specifications

     Storage  One mSATA  One 2.5” SATA HDD (only in AC version)  Power connector  GOT5153W-845-FR-DC/GOT5153W-845-PCT-DC : 9VDC to 36VDC with phoenix power connector or  GOT5153W-845-FR-J/GOT5153W-845-PCT-J: 12VDC w/external 60W AC Adapter with screw type connector Introduction...

  • Page 10: System Specification

    GOT5153W-845 User’s Manual System Specification  15.6” WXGA(1366x768) LCD with LED backlight  Project capacitive multi-touch or 5 wired flat resistive touch  Fanless Heat Dispensing Design  Disk drive housing:  One 2.5” SATA drive (only in AC version) ...

  • Page 11: Dimensions

    GOT5153W-845 User’s Manual Dimensions This diagram shows you dimensions and outlines of the GOT5153W-845. Introduction...
  • Page 12 GOT5153W-845 User’s Manual Introduction...

  • Page 13: I/O Outlets

    GOT5153W-845 User’s Manual I/O Outlets Please refer to the following illustration for I/O locations of the GOT5153W-845. Function Function POWER SWITCH (ATX) COM 2(RS-232) Power Input connector (Screw) HDMI Power Input connector (Phoenix) Dual USB 3.0 ports Speaker Ethernet (RJ-45) Dual USB 2.0 ports...
  • Page 14 Power LED orange: display off Display on/off green : display on HDD LED Volume - Brightness - Volume + Brightness + NOTE The volume control function only can be performed under the windows operation system with AXIOMTEK volumeSYNC program. Introduction...

  • Page 15: Packing List

    Screws for HDD x4 (DC version)  HDD mylar (DC version)  Phoenix connector x1 (DC version)  Power Adapter & power cord (AC adapter version) If you can not find the package or any items are missing, please contact Axiomtek distributors immediately. Introduction...
  • Page 16 GOT5153W-845 User’s Manual This page is intentionally left blank. Introduction...

  • Page 17: Hardware And Installation

    GOT5153W-845 User’s Manual Chapter 2 Hardware and Installation The GOT5153W-845 provides rich I/O ports and flexible expansions for you to meet different demand. The chapter will show you how to install the hardware. It includes:  SBC87845 Jumpers and Connectors ...

  • Page 18: Sbc87845 Jumpers And Connectors

    GOT5153W-845 User’s Manual SBC87845 Jumpers and Connectors Component Side Hardware and Installation...
  • Page 19 GOT5153W-845 User’s Manual Solder Side Hardware and Installation...

  • Page 20: Jumper Settings

    GOT5153W-845 User’s Manual 2.2.1 Jumper Settings Making the proper jumper settings configure the SBC87845 to match the needs of your application. The following table shows the default jumper settings for the onboard devices. ★ Default Setting Jumper Jumper Setting ★ OSD function: LCD ON/OFF...

  • Page 21: Connectors

    GOT5153W-845 User’s Manual 2.2.2 Connectors The connectors allow the CPU Board to connect with other parts of the system. Ensure that all connectors are in place and firmly attached. The following table lists the function of each connector on the SBC87845.
  • Page 22 GOT5153W-845 User’s Manual LVDS inverter connector: CN1 Description Description Inverter ON-OFF +12V +12V Backlight control +12V LVDS connector: CN2 Pin Assignment Description Description LVDSA_DATAN0 LVDSB_DATAN2 LVDSA_DATAP0 LVDSB_DATAP2 Resolution selection[0] Resolution selection[1] LVDSA_DATAN1 LVDSA_DATAN3 LVDSB_DATAN3 LVDSA_DATAP1 LVDSB_DATAN0 LVDSA_DATAP3 LVDSB_DATAP3 LVDSB_DATAP0 LVDSA_DATAN2...
  • Page 23 GOT5153W-845 User’s Manual HDD power connector: CN6 Description +12V SIM card connector: CN8 Description Description UIM PWR UIM RST UIM VPP UIM CLK UIM DATA DIO connector: CN9 Description GPIO0 GPIO1 GPIO2 GPIO3 GPIO4 GPIO5 GPIO6 +3.3V GPIO7 Hardware and Installation...
  • Page 24 GOT5153W-845 User’s Manual Power connector: CN10 Description DCIN (+12V) DCIN (+12V) Full size min-PCIe connector: CN7, CN11 CN11 supports mSATA. User can switch PCIE or SATA signal via PCIE/mSATA Mini Card Configuration in BIOS. Please refer to BIOS chapter about PCIE/mSATA Mini Card Configuration.
  • Page 25 GOT5153W-845 User’s Manual System Fan connector: CN18 Description +12V / Speed control output Fan speed detect USB2.0 connector: CN19 Description Description USB- USB- USB+ USB+ +5V Standby Power connector: CN28, CN29 Description Description +5V_SBY  COM port Connector The pin assignment of RS-232/RS-422/RS-485 is listed on the following table.

  • Page 26: Ethernet

    GOT5153W-845 User’s Manual Ethernet The GOT5153W-845 is equipped with two high performance Plug and Play Ethernet interfaces, full compliant with IEEE 802.3 standard, and can be connected with a RJ-45 LAN connector. Please refer to detailed pin assignment list below:...

  • Page 27: Mountings - Wall/Desktop/Vesa

    There are several mounting ways for the GOT5153W-845, Wall, Desktop and VESA mountings. 2.4.1 Wall-Mounting The GOT5153W-845 is designed for Wall mounting application. Please refer to the following steps: Fix wall mount bracket on the back of the unit. Hardware and Installation...

  • Page 28: Desktop-Mounting

    GOT5153W-845 User’s Manual 2.4.2 Desktop-Mounting The GOT5153W-845 is designed for desktop mounting application. Please refer to the following steps: Step 1 Find out the screws as marked on the back side of chassis. Step 2 Assemble the desktop stand to the chassis, and fix the screws.

  • Page 29: Hdd Installation

    GOT5153W-845 User’s Manual HDD Installation The GOT5153W-845 provides a convenient Hard Disk Drive (HDD) bracket for users to install 2.5” SATA HDD. Please follow the steps: Step 1 Unscrew eight screws to remove the back cover. Step 2 Unscrew 4 screws from the HDD bracket and take out HDD bracket.
  • Page 30 GOT5153W-845 User’s Manual Sticks the HDD mylar on the 2.5” HDD and screws the HDD to the bracket. Step 3 Hardware and Installation...
  • Page 31 GOT5153W-845 User’s Manual Step 4 Fix the HDD bracket into the system, and plug the data and power cable to HDD. Installation complete. Hardware and Installation...

  • Page 32: Dram Installation

    GOT5153W-845 User’s Manual DRAM Installation The GOT5153W-845 provides one 204-pin DDR3L SODIMM socket that support system memory up to 8GB. Please follow steps below to install the memory modules: Step 1 Open the back cover and find out the DIMM socket on main board(SBC87845).
  • Page 33 GOT5153W-845 User’s Manual Step 3 Install the memory module into the socket and push it firmly down until it is fully seated. The socket latches are levered upwards and clipped on to the edges of the DIMM. Hardware and Installation...

  • Page 34: Mini Cards Card Installation

    Mini cards Card Installation 2.7.1 Wireless LAN Card Installation The GOT5153W-845 provides two Mini card slots for user to install wireless LAN cards. You can choose either slot 1 or slot 2 to install the wireless LAN card and refer to the following...
  • Page 35 GOT5153W-845 User’s Manual Step 3 Find the built-in Antenna cable. Step 4 There are two connectors on wireless LAN card. One is MAIN, and the other is auxiliary. Connect antenna cable to MAIN connector on wireless LAN card. Hardware and Installation...

  • Page 36: Msata Card Installation

    GOT5153W-845 User’s Manual 2.7.2 mSATA Card Installation The GOT5153W-845 provides one Mini card slot for user to install mSATA. Please choose the slot 2 when installing the mSATA card and refer to the following instructions and illustration: Step 1 Open the back cover and find out the mini-card slot on main board.

  • Page 37: Power Input (Phoenix Type)

    GOT5153W-845 User’s Manual Power Input (Phoenix type) GOT5153W-845 equips with a phoenix type power connector. It adopts 9VDC to 36VDC. Please follow the signs on power connector to connect DC power source. －:Power negative +: Power positive Hardware and Installation...

  • Page 38: Ami Bios Setup Utility

    GOT5153W-845 User’s Manual Chapter 3 AMI BIOS Setup Utility This chapter provides users with detailed description how to set up basic system configuration through the AMIBIOS8 BIOS setup utility. Navigation Keys The BIOS setup/utility uses a key-based navigation system called hot keys. Most of the BIOS setup utility hot keys can be used at any time during the setup navigation process.

  • Page 39: Main Menu

    GOT5153W-845 User’s Manual Main Menu  System Time/Date Use this option to change the system time and date. Highlight System Time or System Date using the <Arrow> keys. Enter new values through the keyboard. Press the <Tab> key or the <Arrow>...

  • Page 40: Advanced Menu

    GOT5153W-845 User’s Manual Advanced Menu The Advanced menu allows users to set configuration of the CPU and other system devices. You can select any of the items in the left frame of the screen to go to the sub menus: ...
  • Page 41 GOT5153W-845 User’s Manual  NCT6106D Super IO Configuration Use this screen to select options for the Super IO Configuration, and change the value of the selected option AMI BIOS Setup Utility...
  • Page 42 GOT5153W-845 User’s Manual Serial Port 1-2 configuration Serial port This option used to enable or disable the serial port. Device Setting This item specifies the base I/O port address and Interrupt Request address of serial port. The port 1 Optimal setting is 3F8/IRQ4.
  • Page 43 GOT5153W-845 User’s Manual  Hardware Monitor This screen shows the Hardware Health Status in real time.  ACPI Settings You can use this screen to select options for the ACPI Configuration, and change the value of the selected option. A description of the selected item appears on the right side of the screen.
  • Page 44 GOT5153W-845 User’s Manual   CPU Configuration This screen shows the CPU Configuration and intel virtualization technology enable/disable selected.  SATA Configuration You can use this screen to select options for the SATA Configuration, and change the value of the selected option.
  • Page 45 GOT5153W-845 User’s Manual   USB Configuration This screen shows the USB Configuration.  Utility Configuration This screen shows the Utility Configuration. AMI BIOS Setup Utility...
  • Page 46 GOT5153W-845 User’s Manual  PCIE/mSATA Mini Card Configuration This screen shows the PCIE/mSATA Mini Card Configuration. Here are the options for your selection, PCIE, mSATA. AMI BIOS Setup Utility...

  • Page 47: Chipset Menu

    GOT5153W-845 User’s Manual  Chipset Menu The Chipset menu gives the North Bridge memory information and South Bridge TXE information.  North Bridge This screen shows the North Bridge memory information. AMI BIOS Setup Utility...
  • Page 48 GOT5153W-845 User’s Manual  South Bridge This screen shows the South Bridge TXE information. AMI BIOS Setup Utility...

  • Page 49: Security

    GOT5153W-845 User’s Manual Security AMI BIOS Setup Utility...

  • Page 50: Boot Menu

    GOT5153W-845 User’s Manual Boot Menu The Boot menu allows users to change boot options of the system. You can select any of the items in the left frame of the screen to go to the sub menus:   Setup Prompt Timeout Set the Timeout for wait press key to enter Setup Menu ...

  • Page 51: Save & Exit

    GOT5153W-845 User’s Manual Save & Exit AMI BIOS Setup Utility...
  • Page 52 GOT5153W-845 User’s Manual This page is intentionally left blank. AMI BIOS Setup Utility...

  • Page 53: Chapter 4 Drivers Installation

    Chapter 4 Drivers Installation System GOT5153W-845 supports Windows 7, Windows 8/8.1 ,WES 7 and WE8S. To facilitate the installation of system driver, please carefully read the instructions in this chapter before start installing. Insert Driver CD and select the “\Drivers”.

  • Page 54: Touch Screen

    GOT5153W-845 User’s Manual Touch Screen The GOT5153W-845 uses projected capacitive multi-touch . There are the specification and driver installation which are listed below. It also can drive the touch panel to get two fingers touch function that based on the Windows 7 support.

  • Page 55: Embedded O.s

    GOT5153W-845 User’s Manual Embedded O.S. The GOT5153W-845 provides the WES 7 and WE8S Embedded. The O.S. is supported devices which are listed below. 4.3.1 WES 7 & WE8S Here are supported onboard devices: Onboard Multi I/O  SATA HDD ...
  • Page 56 GOT5153W-845 User’s Manual This page is intentionally left blank. Drivers Installation...

  • Page 57: Appendix A Watchdog Timer

    GOT5153W-845 User’s Manual Appendix A Watchdog Timer About Watchdog Timer Software stability is major issue in most application. Some embedded systems are not watched by human for 24 hours. It is usually too slow to wait for someone to reboot when computer hangs.

  • Page 58: Wdt Sample Program

    GOT5153W-845 User’s Manual WDT Sample Program Enable WDT 1.Enable configuration -O 2E 87 -O 2E 87 2. Select Logic device: -O 2E 07 -O 2F 08 3. WDT Device Enable -O 2E 30 -O 2F 01 4. Set timer unit -O 2E F0 -O 2F 00 ...

  • Page 59: How To Use Dio Software Programming

    GOT5153W-845 User’s Manual How to Use DIO Software Programming Digital I/O Software Programming  I2C to GPIO PCA9554  I2C address: 0b01000000. Watchdog Timer...
  • Page 60 GOT5153W-845 User’s Manual Watchdog Timer...

  • Page 61: Appendix B Volume Control

    Volume Control About Volume Control Axiomtek offers the volume control tool under Windows 7 and Windows 8, people can adjust the system volume depending on your personal taste and the amount of ambient volume in the room after installing the volume control tool.
  • Page 62 GOT5153W-845 User’s Manual Volume Control...
  • Page 63 GOT5153W-845 User’s Manual Follow the installing procedures and press “Close”. Step 2 Volume Control...
  • Page 64 GOT5153W-845 User’s Manual Volume Control...
  • Page 65 GOT5153W-845 User’s Manual Volume Control...
  • Page 66 GOT5153W-845 User’s Manual Volume Control...
  • Page 67 GOT5153W-845 User’s Manual Step 3 System auto reboot, installation completed. Volume Control...
  • Page 68 GOT5153W-845 User’s Manual Select “△” icon then finding out the “Axiomtek” to ensure the volume driver Step 4 is installed appropriately. Step 5 How to use the Volume Control Select volume +- to adjust the system volume. Volume Control...

  • Page 69: Removed Volume Control Tool

    GOT5153W-845 User’s Manual Removed Volume Control Tool Step 1 Please insert the driver CD and follow the path to select the proper driver, “\Driver\Step7 Volume Sync (Only for GOT5103-845)”. Volume Control...
  • Page 70 GOT5153W-845 User’s Manual Follow the procedures and press “Close”. Step 2 Volume Control...
  • Page 71 GOT5153W-845 User’s Manual Volume Control...
  • Page 72 GOT5153W-845 User’s Manual Volume Control...
  • Page 73 GOT5153W-845 User’s Manual Step 3 System auto reboot, uninstallation completed. Volume Control...

Table of Contents