39/IGNITION SYSTEM
Ignition coil - checking the secondary winding
24.3
Condition
Ignition coil cylinder 1 is disconnected.
Spark plug connector cylinder 1 has been removed.
–
Remove the fuel tank.
Ignition coil cylinder 1 - check the secondary winding resistance
–
Measure the resistance between the specified points.
Ignition coil pin 2 (+) – Ignition coil pin 3
Ignition coil
Resistance of secondary winding
at: 20 °C (68 °F)
»
If the displayed value is not equal to the setpoint value:
–
Replace the ignition coil.
600739-13
10.4... 15.6 kΩ
177