KTM 690 Enduro EU 2009 Repair Manual page 119

30/DISASSEMBLING THE ENGINE
–
Loosen the screws
clutch springs.
–
Remove the pressure cap
300052-10
–
Remove the pressure piece
–
Bend up the lock washer
300053-10
–
Hold the clutch cage using the special tool and remove the nut
clutch hub.
Gear segment (75029081000) (
Info
Make sure that the crankshaft is not blocked.
–
Remove the nut
Info
300054-10
Left-handed thread!
–
Take off the stepped washer and remove the half-washers
–
Take off the clutch cage.
302125-10
–
Remove needle bearing
300056-10
diagonally and remove them with their spring retainers and

.

.

.

p. 252)
of the primary gear.

and supporting plate

of the inner

.

.

117