03/Frame; Removing The Engine Guard; Installing The Engine Guard - KTM 690 Enduro EU 2009 Repair Manual

03/FRAME

Removing the engine guard

7.1

Installing the engine guard

7.2
–
Stand the motorcycle on its side stand on a horizontal surface.
–
Remove screws
–
Pull the engine guard forward out of the holders and set it down.
100198-10
–
Slide the engine guard into holders
–
Position the engine guard. Mount and tighten screws.
Guideline
Remaining screws, chassis
100199-10
on the left and right.

at the rear.

M6
39
10 Nm (7.4 lbf ft)