01/FORK, TRIPLE CLAMP
Disassembling the fork legs
5.10
Info
These operations are the same on both fork legs.
Condition
The fork legs have been removed.
–
Remove protection cap
–
Note down the current state of the rebound
–
Completely open the adjusters of the rebound and compression damping.
200736-10
–
Clamp the fork leg in the area of the lower triple clamp.
Clamping stand (T1403S) (
200643-10
–
Loosen the screw cover
Info
The screw cover cannot be removed yet.
200737-10
–
Release the fork leg and clamp it with the fork stub.
Info
Use soft jaws.
200690-10
–
Push the outer tube downward.
–
Pull the spring downward. Mount the special tool on the hexagon.
Open-end wrench (T14032) (
Info
The preload spacers
200738-10
.
and compression damping
p. 257)
.
p. 256)
should be above the special tool.
18
.