Installing The Headlight Mask With The Headlight - KTM 690 Enduro EU 2009 Repair Manual

14/LIGHT SYSTEM, INSTRUMENTS

Installing the headlight mask with the headlight

16.9
(690 Enduro R)
–
Remove screw
–
Release rubber band
800097-10
–
Disconnect the electrical plug-in connection
with the headlight.
800102-10
(690 Enduro)
–
Connect the connectors of headlight
–
Check lighting function.
100294-11
–
Remove the cloth from the fender, attach the headlight mask to points
the fender and swing it up to the steering head.
100295-10
–
Position brake-hose guide
Guideline
Remaining screws, chassis
100296-12
and take off the clamp.

. Slide the headlight mask upward and tilt it forward.

and turn signal lights

. Mount and tighten screws

M6
and remove the headlight mask

.


.

10 Nm
(7.4 lbf ft)
100
on