Yealink SIP-T2xP Administrator's Manual page 382

Administrator's Guide for SIP-T2xP and SIP-T19P IP Phones
Parameter-
multicast.receive_priority.enable
Description
Format
Default Value
Range
Example
Parameter-
multicast.receive_priority.priority
Description
Format
Default Value
Range
Example
Parameter-
multicast.listen_address.X.label
Description
366
Configuration File
<y0000000000xx>.cfg
Enables or disables the IP phone to handle
the incoming multicast paging calls when
there is an active multicast paging call on
the IP phone.
If it is set to 1 (Enabled), the IP phone will
answer the incoming multicast paging call
with a higher priority and ignore that with a
lower priority.
Boolean
1
Valid values are:
0-Disabled
1-Enabled
multicast.receive_priority.enable =1
Configuration File
< y0000000000xx >.cfg
Configures the priority of multicast paging
calls.
1 is the highest priority, 10 is the lowest
priority.
If it is set to 0, all incoming multicast paging
calls will be automatically ignored.
Integer
10
0 to10
multicast.receive_priority.priority = 10
Configuration File
< y0000000000xx >.cfg
Configures the label to be displayed on the
LCD screen when receiving the RTP