Yealink SIP-T2xP Administrator's Manual page 303

Example
Parameter-
wui.http_enable
Description
Format
Default Value
Range
Example
Parameter-
network.port.http
Description
Format
Default Value
Range
Example
Parameter-
wui.https_enable
Description
phone_setting.backlight_time = 30
Configuration File
<y0000000000xx>.cfg
Enables or disables the IP phone to access its
web user interface using HTTP protocol.
Note: If you change this parameter, the IP
phone will reboot to make the change take
effect.
Boolean
1
Valid values are:
0-Disabled
1-Enabled
wui.http_enable = 1
Configuration File
<y0000000000xx>.cfg
Configures the HTTP port used to access the
web user interface of the IP phone.
The default HTTP port is 80.
Note: If you change this parameter, the IP
phone will reboot to make the change take
effect.
Integer
80
1 to 65535
network.port.http = 80
Configuration File
<y0000000000xx>.cfg
Enables or disables the IP phone to access its
web user interface using HTTPS protocol.
Appendix
287