Yealink SIP-T2xP Administrator's Manual page 318

Administrator's Guide for SIP-T2xP and SIP-T19P IP Phones
Parameter-
features.send_key_tone
Description
Format
Default Value
Range
Example
Replace Rule
Parameter-
dialplan.replace.prefix.X
Description
Format
Default Value
Range
Example
Parameter-
dialplan.replace.replace.X
Description
Format
Default Value
302
Configuration File
<y0000000000xx>.cfg
Enables or disables the IP phone to play a
tone when a user presses a send key.
If it is set to 1 (Enabled), the IP phone will play
a tone when a user presses a send key.
Note: It works only if the parameter
"features.key_tone" is set to 1 (Enabled).
Boolean
1
Valid values are:
0-Disabled
1-Enabled
features.send_key_tone = 1
Configuration File
<y0000000000xx>.cfg
Configures the string you want to replace.
X ranges from 1 to 100.
String
Blank
String within 32 characters
dialplan.replace.prefix.1 = 123
Configuration File
<y0000000000xx>.cfg
Configures the alternate string instead of what
the user enters.
X ranges from 1 to 100.
String
Blank