Yealink SIP-T2xP Administrator's Manual page 357

Example
Parameter-
account.X.dialoginfo_callpickup
Description
Format
Default Value
Range
Example
Parameter-
account.X.cid_source
Description
account.1.group_pickup_code = *69
Configuration File
<MAC>.cfg
Configures Dialog Info Call Pickup feature for
account X.
If it is set to 1 (Enabled), call pickup is
implemented through SIP signals.
X ranges from 1 to 6.
Note: It is not applicable to SIP-T19P IP
phones.
Boolean
0
Valid values are:
0-Disabled
1-Enabled
account.1.dialoginfo_callpickup = 1
Configuration File
<MAC>.cfg
Configures the presentation of the caller
identity for account X.
0-FROM (Derives the name and number of
the caller from the "From" header).
1-PAI (Derives the name and number of the
caller from the "PAI" header. If the server
does not send the "PAI" header, displays
"anonymity" on the callee's phone).
2-PAI-FROM (Derives the name and number
of the caller from the "PAI" header
preferentially. If the server does not send the
"PAI" header, derives from the "From"
header).
3-RPID-PAI-FROM
Appendix
341