Yealink SIP-T2xP Administrator's Manual page 340

Sip-t2xp series
Hide thumbs Also See for SIP-T2xP:
Table of Contents

Advertisement

Administrator's Guide for SIP-T2xP and SIP-T19P IP Phones
Format
Default Value
Range
Example
Parameter-
features.play_hold_tone.enable
Description
Format
Default Value
Range
Example
Parameter-
features.play_hold_tone.delay
Description
324
If it is set to 0 (UAC), refreshing the session is
performed by the IP phone.
If it is set to 1 (UAS), refreshing the session is
performed by a SIP server.
X ranges from 1 to 6.
Integer
0
Valid values are:
0-UAC
1-UAS
account.1.session_timer.refresher = 0
Configuration File
<y0000000000xx>.cfg
Enables or disables the IP phone to play a
tone when there is a hold call on the IP
phone.
Boolean
1
Valid values are:
0-Disabled
1-Enabled
features.play_hold_tone.enable = 1
Configuration File
<y0000000000xx>.cfg
Configures the interval (in seconds) at which
the IP phone plays a hold tone.
If it is set to 30 (30s), the IP phone will play a
hold tone every 30 seconds when there is a
hold call on the IP phone.
Note: It works only if the parameter
"features.play_hold_tone.enable" is set to 1
(Enabled).

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sip-t19pSip-t28pSip-t26pSip-t22pSip-t21pSip-t20p

Table of Contents