Yealink SIP-T2xP Administrator's Manual page 132

Administrator's Guide for SIP-T2xP and SIP-T19P IP Phones
3) Press the OK soft key to accept the change.
5. Press the Save soft key to accept the change.
Call transfer enables IP phones to transfer an existing call to another party. IP phones
support call transfer using the REFER method specified in RFC 3515 and offer three types
of transfer:
Blind Transfer -- Transfer a call directly to another party without consulting. Blind

transfer is implemented by a simple REFER method without Replaces in the Refer-To
header.
Semi-attended Transfer -- Transfer a call after hearing the ringback tone.

Semi-attended transfer is implemented by a REFER method with Replaces in the
Refer-To header.
Attended Transfer -- Transfer a call with prior consulting. Attended transfer is

implemented by a REFER method with Replaces in the Refer-To header.
Normally, call transfer is completed by pressing the transfer key. Blind transfer on hook
and attended transfer on hook features allow the IP phone to complete the transfer
through on-hook.
When a user performs a semi-attended transfer, semi-attended transfer feature
determines whether to display the prompt "n New Missed Call(s)" ("n" indicates the
number of the missed calls) on the destination party's phone LCD screen.
Procedure
Call transfer can be configured using the configuration files or locally.
Configuration File
Local
116
<y0000000000xx>.cfg
Web User Interface
Specify whether to complete the
transfer through on-hook.
Configure semi-attended transfer
feature.
For more information, refer to
Transfer on page 336.
Specify whether to complete the
transfer through on-hook.
Configure semi-attended transfer
feature.
Navigate to:
http://<phoneIPAddress>/servlet
?p=features-transfer&q=load
Call