Yealink SIP-T2xP Administrator's Manual page 77

2. Select Custom logo from the pull-down list of Use Logo.
3. Click Browse to select the logo file from your local system.
4. Click Upload to upload the file.
5. Click Confirm to accept the change.
For SIP-T28P IP phones, the image logo is displayed on the idle screen. For
SIP-T26P/T22P IP phones, the image logo screen and the idle screen are displayed
alternately.
To configure a text logo via web user interface (only applicable to SIP-T20P IP phones):
1. Click on Features->General Information.
2. Select the desired value from the pull-down list of User Logo.
Configuring Basic Features
61