Yealink SIP-T2xP Administrator's Manual page 403

Format
Default Value
Range
Example
Parameter-
network.ipv6_static_dns_enable
Description
Format
Default Value
Range
Example
Parameter-
network.ipv6_internet_port.ip
Description
Format
phone will reboot to make the change
take effect.
Integer
0
Valid values are:
0-DHCP
1-Static IP Address
network.ipv6_internet_port.type = 0
Configuration File
<y0000000000xx>.cfg
Enables or disables the phone to use
manually configured static IPv6 DNS
when the parameter
"network.ipv6_internet_port.type" is set to
0 (DHCP).
Note: If you change this parameter, the IP
phone will reboot to make the change
take effect.
Boolean
0
Valid values are:
0-Disabled
1-Enabled
network.ipv6_static_dns_enable= 0
Configuration File
<MAC>.cfg
Configures the IPv6 address when the
IPv6 address assignment method is
configured as Static IP Address and the IP
address mode is configured as IPv6 or
IPv4&IPv6.
Note: If you change this parameter, the IP
phone will reboot to make the change
take effect.
IPv6 Address
Appendix
387