Yealink SIP-T2xP Administrator's Manual page 103

Local
To configure auto redial via web user interface:
1. Click on Features->General Information.
2. Select the desired value from the pull-down list of Auto Redial.
3. Enter the waiting time in the Auto Redial Interval (1~300s) field.
The default waiting time is 10s.
4. Enter the desired times in the Auto Redial Times (1~300) field.
The default value is 10.
5. Click Confirm to accept the change.
To configure auto redial via phone user interface:
1. Press Menu->Features->Auto Redial.
2. Press or
Redial field.
3. Enter the waiting time (in seconds) in the Redial Interval field.
4. Enter the desired times in the Redial Times field.
5. Press the Save soft key to accept the change.
Web User Interface
Phone User Interface
, or the Switch soft key to select the desired value from the Auto
Configuring Basic Features
Configure auto redial feature.
Navigate to:
http://<phoneIPAddress>/servlet
?p=features-general&q=load
Configure auto redial feature.
87