Yealink SIP-T2xP Administrator's Manual page 88

Sip-t2xp series
Hide thumbs Also See for SIP-T2xP:
Table of Contents

Advertisement

Administrator's Guide for SIP-T2xP and SIP-T19P IP Phones
Area codes are also known as Numbering Plan Areas (NPAs). They usually indicate
geographical areas in one country. When entered numbers match the predefined area
code rule, the IP phone will automatically add the area code before the numbers when
dialing out them. IP phones only support one area code rule.
Procedure
Area code rule can be configured using the configuration files or locally.
Configuration File
Local
To configure an area code rule via web user interface:
1.
Click on Settings->Dial Plan->Area Code.
2.
Enter the desired values in the Code, Min Length (1-15) and Max Length (1-15)
fields.
72
<y0000000000xx>.cfg
Web User Interface
Create the area code rule and
specify the maximum and
minimum lengths of entered
numbers.
For more information, refer to
Plan
on page 302.
Create the area code rule and
specify the maximum and
minimum lengths of entered
numbers.
Navigate to:
http://<phoneIPAddress>/servlet
?p=settings-areacode&q=load
Dial

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sip-t19pSip-t28pSip-t26pSip-t22pSip-t21pSip-t20p

Table of Contents