Yealink SIP-T28P Quick Reference Manual

If A and B are on a conversation and B may want A to transfer the call to C, three ways could
be used to transfer the call: Blind Transfer, Attended Transfer, and Semi-Attended Transfer.
A press TRAN Button or Transfer softkey to put B on hold followed with dialing C and pressing the
Transfer softkey to call out.
A would be on hold and the LCD would display as Transferred. A could press the Cancel softkey button
to be disconnected from the call.
If C picks up the phone call, B would be able to talk to C.
A press the TRAN button or Transfer softkey to put B on hold followed with dialing C and pressing the
OK or SEND button to call out.
While C is ringing, A hang up or press the Transfer softkey. Then A will turn to the hold status, and the
LCD will display as Transferred
A will be disconnected from the call, when C pick up, B can talk to C
A press TRAN Button or Transfer softkey to put B on hold followed with dialing C and press the OK or
SEND button to call out
After C answered it, A and C can have a private conversation without B, then A press Tran button to
complete the transfer
A will be disconnected from the call. B can talk to C
User can check the status of IP phone: IP address, MAC, Firmware,etc.
User can check and configure the accounts information including the name,
password, SIP Server, etc.
DND Code, etc.
Allowing the users to check and edit the Voice Mail and Text Message.
Call history are shown here:
You can download the latest user manuals from our website:
http://www.yealink.com/en/download.asp?BigClassName=IP%20Phone
Call Forward->Enter
Key as Send,
V60.0