Administrator's Guide for SIP-T2xP and SIP-T19P IP Phones
PC Port Transmission Method
Parameter-
network.pc_port.speed_duplex
Description
Format
Default Value
Range
Example
Parameter-
network.PC_port.enable
Description
Format
Default Value
Range
Example
Parameter-
network.bridge_mode
Description
276
Configuration File
<y0000000000xx>.cfg
Configures the transmission method of PC port.
Note: We recommend that you do not change
this parameter. If you change this parameter,
the IP phone will reboot to make the change
take effect.
Integer
0
Valid values are:
0-Auto negotiate
1-Full duplex, 10Mbps
2-Full duplex, 100Mbps
3-Half duplex, 10Mbps
4-Half duplex, 100Mbps
network.pc_port.speed_duplex = 0
Configuration File
<y0000000000xx>.cfg
Enables or disables the PC port.
Note: If you change this parameter, the IP
phone will reboot to make the change take
effect.
Boolean
1
Valid values are:
0-Disabled
1-Auto Negotiation
network.PC_port.enable = 1
Configuration File
<y0000000000xx>.cfg
Configures the PC port mode.