Yealink SIP-T2xP Administrator's Manual page 221

RPC Method
Upload
ScheduleInform
FactoryReset
TransferComplete
AddObject
DeleteObject
For more information on TR-069, refer to
http://www.yealink.com/DocumentDownload.aspx?CateId=142&flag=142.
Procedure
TR-069 can be configured using the configuration files or locally.
Configuration File
Local
To configure TR-069 via web user interface:
1. Click on Settings->TR069.
File types supported by IP phones are:
Firmware Image

Configuration File

This method is used to cause the CPE to upload a
specified file to the designated location.
File types supported by IP phones are:
Configuration File

Log File

This method is used to request the CPE to schedule a
one-time Inform method call (separate from its
periodic Inform method calls) sometime in the future.
This method resets the CPE to its factory default state.
This method informs the ACS of the completion
(either successful or unsuccessful) of a file transfer
initiated by an earlier Download or Upload method
call.
This method is used to add a new instance of an
object defined on the CPE.
This method is used to remove a particular instance
of an object.
Yealink TR-069 Technote
<y0000000000xx>.cfg
Web User Interface
Configuring Advanced Features
Description
, available online:
Configure TR-069 feature.
For more information, refer to
TR-069 on page 383.
Configure TR-069 feature.
Navigate to:
http://<phoneIPAddress>/servl
et?p=settings-preference&q=lo
ad
205