Auto Redial - Yealink SIP-T2xP Administrator's Manual

Administrator's Guide for SIP-T2xP and SIP-T19P IP Phones
5. Click Confirm to accept the change.
To configure call waiting tone via web user interface:
1. Click on Features->Audio.
2. Select the desired value from the pull-down list of Call Waiting Tone.
3. Click Confirm to accept the change.
To configure call waiting and call waiting tone via phone user interface:
1. Press Menu->Features->Call Waiting.
2. Press
Waiting field.
3. Press
Tone field.
4. (Optional.) Enter the call waiting on code in the CW On Code field.
5. (Optional.) Enter the call waiting off code in the CW Off Code field.
6. Press the Save soft key to accept the change.
Auto redial allows IP phones to redial a busy number after the first attempt. Both the
number of attempts and waiting time between redials are configurable.
Procedure
Auto redial can be configured using the configuration files or locally.
Configuration File
86
or , or the Switch soft key to select the desired value from the Call
or , or the Switch soft key to select the desired value from the Play
<y0000000000xx>.cfg
Configure auto redial feature.
For more information, refer to

Auto Redial

on page 311.