Yealink SIP-T2xP Administrator's Manual page 306

Administrator's Guide for SIP-T2xP and SIP-T19P IP Phones
Format
Default Value
Range
Example
Parameter-
phone_setting.phone_lock.unlo
ck_pin
Description
Format
Default Value
Range
Example
Parameter-
phone_setting.phone_lock.lock
290
numbers, reject incoming calls by pressing the
X key, answer incoming calls by lifting the
handset, pressing the Speakerphone key, the
HEADSET key or the OK key, place an active
call on hold by pressing the Hold soft key or
the HOLD key, resume the held call by
pressing the Resume soft key or the HOLD key,
and end the call by hanging up the handset,
pressing the Speakerphone key or pressing
the X key (pressing the X key to end the call is
not applicable to SIP-T22P/T21P/T20P). For
SIP-T22P/T21P , HOLD key does not exist; For
SIP-T20P , soft keys do not exist. For SIP-T19P ,
HOLD and X keys do not exist.
If it is set to 0 (Disabled), IP phone lock feature
is disabled.
Integer
0
Valid values are:
0-Disabled
1-Menu Key
2-Function Keys
3-All Keys
phone_setting.lock = 1
Configuration File
<y0000000000xx>.cfg
Configures a new unlock PIN. Once the IP
phone is locked, you can use the default
password "123" to unlock it.
numeric characters
123
characters within 15 digits
phone_setting.phone_lock.unlock_pin = 123
Configuration File
<y0000000000xx>.cfg