GeoVision GV-Compact V3 User Manual page 166

[LAN Configuration]
According to the network environment, select Wired or Wireless.
Before enabling Wireless, set up a wireless module first. For details, see 6.7.2
Wireless-Client Mode.
[LAN Configuration]
Dynamic IP address: Assign a dynamic IP by the DHCP server. By default the

GV-Compact DVR V3 will be automatically assigned a dynamic IP address by the DHCP
server. To check the current IP address, click the Test DHCP button.
Static IP address: Assign a static IP or fixed IP to the GV-Compact DVR V3. Type the

GV-Compact DVR V3's IP address, Subnet Mask, Gateway and DNS Server parameters.
If no DHCP server exists in your network environment, the following default IP address
will be assigned to the GV-Compact DVR V3.
Parameters
IP address
Subnet Mask
Router/Gateway
Primary DNS server
Secondary DNS server
PPPoE: Establish the connection to your ISP. Type the username and password

provided by the ISP to establish the connection. However, if the IP address provided by
your ISP is dynamic, use the DDNS function to obtain a domain name linking to the unit's
changing IP address before enabling the PPPoE function. For details on Dynamic DNS
Server Settings, see 6.7.3 Advanced TCP/IP.
Note: To establish connection through a broadband modem, you may refer to this article:
ftp://geo-demo-japan.dipmap.com/Technotice/GV_IP_Devices/How to access GV-IP Camera
through broadband modem.pdf
Default
192.168.0.10
255.255.255.0
192.168.0.1
192.168.0.1
192.168.0.2
Remote Configurations
6
157