Add New Remote Destination - Cisco 6921 User Manual

Add New Remote Destination

Add New Remote Destination
Procedure
Step 1
On your User Options web page, select User Options > Mobility Settings > Remote Destinations.
Step 2 Select Add New.
Step 3 Enter the following information:
• Name: Enter a name for the mobile (or other) phone.
• Destination Number: Enter your mobile phone number.
Step 4 Select your remote destination profile from the drop-down list.
Your remote destination profile contains the settings that apply to remote destinations that you create.
Step 5 Check the Mobile Phone check box to allow your remote destination to accept a call sent from your desk
phone.
Step 6
Check the Enable Mobile Connect check box to allow your remote destination to ring simultaneously with
your desk phone.
Step 7 Select one of the following options in the Ring Schedule area:
• All the time: Select this option if you do not want to impose day and time restrictions on ringing the
• As specified below: Select this option and select from the following items to set up a ring schedule
The ring schedule drop-down lists include only the access lists that you have created.
Step 8 Select one of these ringing options:
• Always ring this destination.
• Ring this destination only if the caller is in the allowed access list that you select.
• Do not ring this destination if the caller is in the blocked access list that you select.
Step 9 Select Save.
Cisco Unified IP Phone 6921, 6941, 6945, and 6961 User Guide for Cisco Unified Communications Manager 9.0
(SCCP and SIP)
94
remote destination.
based on day and time:
◦ Select a check box for each day of the week you want to allow calls to ring the remote destination.
◦ For each day, select All Day or select the beginning and ending times from the drop-down lists.
◦ Select the time zone from the drop-down list.
User Options