Flame & Temperature Adjustment; Flame Characteristics - Majestic Vermont Castings Chateau DVT38S2 Installation Instructions And Homeowner's Manual

Chateau Decorative Gas Appliance
™
Log Top
Left (F6)
Fig. 43 Place logs F5, F6 and F10.
16¹⁄₄"
Refractory
(413mm)
Line
Firebox
Valve Box
Assembly
Side
13⁵⁄₈"
(346mm)
LG338
Fig. 44 Log top center (F10) must be placed according to
these dimensions. NOTE: This view is shown without lava
rock or embers for clarity.
Flame & Temperature Adjustment
RN/RP & EN/EP Models
For units equipped with 'HI/LO' valves the flame
adjustment is accomplished by rotating the 'HI/LO'
adjustment knob located near the center of the gas
control valve. (Fig. 45)
SIT 820 Valve
Turn
counterclockwise
to increase
flame height
Fig. 45 Flame adjustment knob for SIT valve.
24
Log Top Center (F10)
Log Top Middle (F5)
LG328
Top View
1¹⁄₂"
(38mm)
Fettle Line
Turn clockwise
to decrease
flame height

Flame Characteristics

It is important to periodically perform a visual check of
the pilot and burner flames. Compare them to the
illustratrations below. (Figs. 46, 47)
If the flame patterns appear abnormal contact a
qualified service provider for service and adjustment.
SIT EN/EP
SIT Top Convertible
3/8" - 1/2"
Fig. 46 Correct pilot flame appearance.
LG330
Fig. 47 DVT38S2 burner flame pattern.
FP1229a
20007172