Lava Rocks & Ember Material; Flame & Temperature Adjustment - Majestic DVRTSB Homeowner's Installation And Operating Manual

DVRTSB Bay Window Fireplace
B105
B107
B109
Fig. 39 DVRTSB logs.
Lava Rock & Ember Material
Your log set contains two types of "Lava Rocks".
The placement of this material is best done after the
logs have been installed.
Fig. 40 Location of log cradle prongs in relation to assembled logs.
Ceramic Ember Rocks (Pt. # 57897)
Remove these 'rocks' from the packaging and spread
them over the burner tiles in a random fashion to fill
up the spaces between the logs. (Fig. 40) Only place
ceramic embers in areas shown in Figure 40.
Lava Rock (Pt.# 10001454)
Remove this material from the packaging and spread
it over the ceramic floor panels outside the log stack.
DO NOT PLACE THIS MATERIAL ON THE BURNER
TILES.
24
B110
B106
B108
LG298
Ceramic Ember Rock Location
Flame & Temperature Adjustment
RN/RP Models
For units equipped with 'HI/LO' valves the flame
adjustment is accomplished by rotating the 'HI/LO'
adjustments knob located near the center of the gas
control valve. (Figs. 41 & 42)
Turn
counterclockwise
to decrease
flame height
Fig. 41 Flame adjustment knob for Honeywell valve.
Turn
counterclockwise
to increase
flame height
Fig. 42 Flame adjustment knob for SIT valve.
FP390
FLAME ADJUSTMENT KNOB
11/21/96
LG299
Turn clockwise
to increase
flame height
Turn clockwise
to decrease
flame height
HV102
Honeywell hi/lo knob
4/5/99 djt
10003848