Table of Contents
Advertisement
Chateau
Decorative Gas Appliance
™
Remote Controls
Optional remote control units are available to control
different functions of the appliance.
Model
Function(s) Controlled
MRC1
On/ Off
MRC2
On/ Off and Temperature
MRC3
On/ Off and Temperature control
with digital display and programmable 24-
hour clock
IMT
Wall-mounted Thermostat Control
(For use in Canada ONLY)
Full Surround Mantel
The Chateau Full Surround has been designed for
installation with the DVT38S2 Chateau fireplace.
Hinged face panels on the surround allow access tot
he fireplace control box and gas valve. Accurate
framing of the fireplace is critical to proper installation.
Refer to the instructions supplied with the Surround for
complete details.
CAUTION: If you are framing with the plan to use the
surround mantel mentioned above, it is extremely
critical to meet the dimensions provided, especially if
the mantel is not available at the time of framing.
NOTE: In the event the mantel is not available at the
time of framing the unit/valve box, you must make the
spacer on the left side of the valve box in order to
access the valve box door through the opening in the
mantel.
Full Surround Mantel Models:
CHFN049S
CHFWC49S
CHFPR49S
36
Accessories
Position the DVT38S2 fireplace in the rough opening.
Measure up from the floor 45¹⁄₄" and attach the control box
spacer (G) to the inside of the wall stud. Attach a framing
cross piece between the studs, above the control box
spacer. Fit the control box tight against the spacer (G) and
the frame piece above. Fasten the control box to the frame
piece with 1¹⁄₄" screws through the holes in the top of the
control box.
Fig. 53 Chateau Full Surround Mantel framing.
3 x 12 Control box Spacer 'G'
48¹⁄₈"
11/16"
24¹⁄₈"
C L
of Glass
(Not Unit)
Framing
Cross
Piece
45¹⁄₄"
FP1479
20007172
Hide quick links:
Advertisement
Table of Contents
