Viewing And Modifying Patient Setup Screens; C-Flex Setting Screen - Respironics REMstar Pro M Series User Manual

4.3.1.2
Figure 4–7 shows how to navigate the Patient Setup screens.
The Patient Setup screens are described below.
– FOSQ
Setup
C-Flex Setting
1 2 3
C-Flex Setting
FLEX comfort has been
disabled on this unit.
rEm p m s
star ro ErIEs
v m
IEWIng and odIfyIng
Press
Auto Off
Feature: ON
f 4–7 n
IgUrE
1. Standby Screen
The Standby screen appears when you first apply power to the
device. You can access the Patient Setup menu from this screen by
pressing the + button. Once inside the Setup menu, press the
+
or buttons to cycle through the screens.
2.

C-Flex Setting Screen

This screen displays the C-Flex level set by your home care
provider. This setting allows you to adjust the level of air pressure
relief that you feel when you exhale during therapy. Your home
care provider will either enable or disable C-Flex.
– If C-Flex is enabled and the setting is not comfortable for you,
you can increase or decrease the setting by pressing the + or
– buttons. The setting of 1 provides a small amount of pres-
sure relief, with higher numbers providing additional relief.
Press the + or – buttons to increase or decrease the setting.
– If your provider has disabled C-Flex, you cannot enable or ad-
just the setting. The screen shown at left displays to indicate
that C-Flex is disabled.
U m
sEr anUal
p s s
atIEnt EtUp
+
– FOSQ Setup
+
Press
Press
C-Flex Setting
1 2 3
Ramp Start Pres
4.0 cmH 2 O
Mask Alert
Feature: ON
p
avIgatIng thE atIEnt
CrEEns
s s
EtUp CrEEns
4-7