Respironics REMstar Pro M Series User Manual page 37

p
roblEm
You are having problems
connecting the tubing
to the device.
You are experiencing
excessive air leaks where
the tubing connects to
the device.
rEm p m s
star ro ErIEs
W I h
hy t
You have lost the
air outlet port or
are traveling and
forgot to bring the
port with you.
The air outlet port
is not installed cor-
rectly and doesn't
seal properly.
U m
sEr anUal
appEnEd
If you are not using a humidifier, you cannot
connect your tubing to the device without the
detachable air outlet port, shown below.
You must have the port attached properly
before connecting your tubing.
Remove the port and reattach it to make sure
it's properly installed.
To remove the port:
a. Put your thumb underneath the port and
insert your index finger into the port open-
ing.
b. Pivoting from the bottom, unsnap the port
and pull it away from the device.
To properly reattach the port:
a. Make sure it is correctly oriented (with the
port opening at the top), and insert the
two latches at the bottom of the port into
the openings on the bottom of the device.
b. Push the top of the port down to snap it
into place.
Reattach your tubing, turn on the airflow, and
check to make sure you do not still feel air com-
ing out of the port area.
W d
hat to o
5-7