C-Flex Disabled; Changing The Device Settings; Navigating The Display Screens - Respironics REMstar Pro M Series User Manual

4.2.2.2
If C-Flex has not been prescribed for you and your provider has disabled the C-Flex feature, the
following screen appears when you press the C-Flex button, and you cannot enable or adjust the
setting.
4.3 C
hangIng thE
You can view the set pressure on the Active Display screen, as well as the following information
on the Patient Data screens:
• Therapy usage hours
• Number of sessions greater than 4 hours
• System leak (if enabled by your home care provider)
• Apnea/Hypopnea Index (if enabled by your home care provider)
• Compliance check value
• Summary data
Additionally, you can view and modify the following settings on the Patient Setup screens:
• C-Flex (if enabled by your home care provider)
• Ramp starting pressure (if enabled by your home care provider)
• Mask alert (enable/disable)
• Auto off (enable/disable)
4.3.1 n
avIgatIng thE
Use the button to navigate to the next screen and the
screen.
+
Use the and — buttons to adjust the settings on the Patient Setup screens.
4-4
C-f d
lEx IsablEd
f
IgUrE
d
EvICE
d
Isplay
C-Flex Setting
FLEX comfort has been
disabled on this unit.
4–5 C-f d
lEx IsablEd
s
EttIngs
s
CrEEns
s
CrEEn
button to navigate to the previous
rEm p m s
star ro ErIEs
U m
sEr anUal