Device Operation; Starting The Device; Software Version Screen; Standby Screen - Respironics REMstar Pro M Series User Manual

C 4: d
haptEr
This chapter explains how to start the device and change the settings.
4.1 s
tartIng thE
1. Plug the device in to an AC or DC power source. The three primary buttons light up and the
Software Version screen momentarily appears, shown in Figure 4–1.
Note: Version 1.0 shown in Figure 4–1 is an example. Your device may have a different
software version installed.
2. The next screen to appear is the Standby (or Inactive) screen, shown in Figure 4–2. You can
access the FOSQ questionnaire or patient settings and data from this screen. See Section 4.3
for instructions on how to navigate the display screens.
Note:
The FOSQ option will only appear on the Standby screen if a SmartCard is
inserted in the device or if a modem is connected.
rEm p m s
star ro ErIEs
o
EvICE pEratIon
d
EvICE
f
IgUrE
– FOSQ
f
U m
sEr anUal
V 1.0
4–1 s v
oftWarE ErsIon
Setup
4–2 s s
IgUrE tandby CrEEn
s
CrEEn
+
4-1