Supplying Power To The Device; Using Ac Power; Connecting The Power Cord To The Power Supply; Connecting The Power Supply Cord To The Device - Respironics REMstar Pro M Series User Manual

3.4 s
UpplyIng
You can power the device using AC or DC power.
Caution:
Warning:
Warning:
Important!
3.4.1 U
sIng
Complete the following steps to operate the device using AC power.
1. Plug the socket end of the AC power cord into the power supply, as shown in Figure 3–5.
2. Plug the pronged end of the AC power cord into an electrical outlet that is not controlled by
a wall switch.
3. Plug the power supply cord's connector into the power inlet on the back of the device, as
shown in Figure 3–6.
3-4
p
oWEr to thE
If this device has been exposed to either very hot or very cold tempera-
tures, allow it to adjust to room temperature before beginning the
following setup procedures.
Route the wires to avoid tripping.
This device is activated when the power cord is connected. Pressing
the button turns the airflow on or off.
If you are using your device with a humidifier, refer to the instructions
included with your humidifier for details on how to power the device
and humidifier.
aC p
oWEr
f 3–5 C
IgUrE onnECtIng thE
f 3–6 C
IgUrE onnECtIng thE
d
EvICE
p C
oWEr ord to thE
p s C
oWEr Upply ord to thE
rEm
star
p s
oWEr Upply
d
EvICE
p m s U
ro ErIEs sEr
m
anUal