Using The Ramp And C-Flex Features; Ramp Feature; C-Flex Comfort Feature; C-Flex Enabled - Respironics REMstar Pro M Series User Manual

4.2 U
sIng thE
You can press the
change the C-Flex setting, if your provider has enabled these features.
4.2.1 r
amp
The device is equipped with an optional ramp feature that your home care provider can enable or
disable. This feature reduces the air pressure when you are trying to fall asleep and then gradually
increases (ramps) the pressure until your prescription setting is reached, allowing you to fall asleep
more comfortably.
If ramp is enabled on your device, after you turn on the airflow, press the
of the device. You can use the Ramp button as often as you wish during the night.
Note: If the ramp feature is disabled, nothing will happen when you press the
ton.
4.2.2 C-f
The C-Flex comfort feature allows you to adjust the level of air pressure relief that you feel when
you exhale during therapy. Your home care provider can enable or disable this feature.
4.2.2.1
When your provider enables C-Flex, a C-Flex level will already be set for you on the device. If this
is not comfortable for you, you can increase or decrease the setting.
To change the C-Flex setting, press the C-Flex button. The screen shown in Figure 4–4 appears,
with an arrow above the current C-Flex setting.
The setting of 1 provides a small amount of pressure relief, with higher numbers providing ad-
ditional relief. To change the pressure relief, press the + or – buttons to increase or decrease the
setting.
Note: You can also view and change the C-Flex setting by navigating to the C-Flex Set-
ting screen from the Patient Setup menu (see Section 4.3).
rEm p m s
star ro ErIEs
r
amp and
(Ramp) button to activate the Ramp feature, or the C-Flex button to
f
EatUrE
C f
lEx omfort EatUrE
C-f E
lEx nablEd
f
IgUrE
U m
sEr anUal
C-f f
lEx EatUrEs
C-FLEX
1 2 3
4–4 C-f s s
lEx EttIng
button on the top
CrEEn
but-
4-3