Seat Leon Owner's Manual page 115

114 Lights and visibility
Headlight range control, lighting of the instrument panel
and controls
Lighting of the instrument panel and controls*
Depending on the model, lighting of the instrument panel and controls can
be adjusted in the Easy Connect system, using the button
⇒ p age 81.
tion button
SETUP
Headlight range control
The headlight range control
the headlight beam and the vehicle load status. This offers the driver opti-
mum visibility and the headlights do not dazzle oncoming drivers ⇒
The headlights can only be adjusted when the dipped beam is switched on.
⇒ F ig.
To reset, turn switch
Value Vehicle load status
– Two front occupants, luggage compartment empty
1 All seats occupied, luggage compartment empty
Fig. 62 Next to the
steering wheel: Head-
light range control
and the func-

⇒ F ig. 62
is modified according to the value of
62:
a)
Value Vehicle load status
All seats occupied, luggage compartment full With trailer
2
and minimum drawbar load
Driver only, luggage compartment full With trailer and
3
maximum drawbar load
a)
If the vehicle load does not correspond to those shown in the table, it is possible to select
intermediary positions.
Dynamic headlight range control
The control is not mounted in vehicles with dynamic headlight range con-
trol. The headlight range is automatically adjusted according to the vehicle
load status when the headlights are switched on.
Instrument panel lighting
In vehicles with the daytime driving light, the instrument panel lighting
switches on in dark conditions (for example, when passing through a tun-
nel). This reminds the driver to manually switch on the dipped beam, so
that the vehicle rear lights also switch on ⇒ p age 109.
WARNING
Heavy objects in the vehicle may mean that the headlights dazzle and
distract other drivers. This could result in a serious accident.
.
● Adjust the light beam to the vehicle load status so that it does not
blind other drivers.
a)
