Speed Warning Function; Start-Stop System - Seat Leon Owner's Manual

Hide thumbs Also See for Leon:
Table of Contents

Advertisement

Speed warning function

Introduction
The speed warning function can help prevent you exceeding
a particular pre-set maximum speed.
The speed warning function will warn the driver if a pre-set maximum speed
is exceeded. The system gives a warning buzzer signal if the set speed is
exceeded by about 3 km/h (2 mph). The warning lamp  and the driver
message
Speed limit exceeded!
strument panel display. The warning lamp  switches off when reducing
speed below the stored maximum limit.
You are recommended to store this speed limit warning if you always wish
to be reminded of a particular speed limit. This could be when driving in
countries with general speed limits, or if a particular speed should not be
exceeded when winter tyres are fitted etc.
Note
● Please bear in mind that, even with the speed warning function, it is still
important to keep an eye on the vehicle speed with the speedometer and to
observe the legal speed limits.
● The speed limit warning function in the version for several countries
warns you at a speed of 120 km/h (80 mph). This is a factory-set speed lim-
it.
Safety First
will be displayed simultaneously on the in-
Operating instructions
Setting speed limit warning
You can use the radio or the Easy Connect* to set, alter or
cancel the speed limit warning.
Vehicles with radio
– Select:
button > control button  Driver assistant > Speed
SETUP
warning
.
Vehicles with Easy Connect
– Select: Systems control button or Vehicle systems > Driver assis-
tant
> Speed warning .
The warning limit can be set from 30 to 240 km/h (20 to 150 mph). The ad-
justment is done in 10 km/h (mph) intervals.

Start-Stop system*

Description and operation
The Start-Stop system helps save fuel and reduce CO
In Start-Stop mode, the engine will automatically switch off when the vehi-
cle stops, when stopping at traffic lights for example. The ignition remains
switched on during the stopping phase. The engine automatically switches
back on when required.
As soon as the ignition is switched on, the Start-Stop function is automati-
cally activated.
Practical Tips
Driving
emissions.
2
Technical specifications
149

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Leon se370 2012

Table of Contents