Turn signal bulb
– Raise the bonnet
⇒ F ig. 136
– Move the loop
remove the cover.
– Turn the bulb holder
– Remove the bulb by pressing on the bulb holder and turning it
anti-clockwise at the same time.
– Installation involves all of the above steps in reverse sequence.
Safety First
Fig. 136 Turn signal bulb
Fig. 137 Turn signal bulb
in the direction of the arrow and
1
⇒ F ig. 137
to the left and pull.
2
Operating instructions
Main beam bulb
– Raise the bonnet
⇒ F ig. 138
– Move the loop
remove the cover.
⇒ F ig. 139
– Slide connector
– Remove the bulb by disconnecting the connector.
– Installation involves all of the above steps in reverse sequence.
Practical Tips
Fuses and bulbs
Fig. 138 Main beam
bulb
Fig. 139 Main beam
bulb
in the direction of the arrow and
1
to the left or right and pull.
2
Technical specifications
255