Seat Leon Owner's Manual page 56

WARNING
● The securing rings are designed only for use with ISOFIX and Top
Tether* child seats.
● Never secure child seats that do not have the ISOFIX and Top Tether*
system, retaining belts or other objects to the securing rings – this could
result in potentially fatal injuries to the child!
● Ensure that the child seat is secured correctly using the "ISOFIX" and
Top Tether* securing rings.
ISOFIX child seat mounting system
When removing or fitting the child seat, please be sure to follow
the manufacturer's instructions.
– Remove the protective caps of the "ISOFIX" rings by placing a
finger in the hole and pulling up
Safety First
Fig. 32 ISOFIX securing
rings
⇒ F ig.
32.
Operating instructions
– Press the child seat onto the ISOFIX retaining rings until the
child seat can be heard to engage securely. If the child seat is
equipped with Toptether* anchor points, secure it to the corre-
spondent ring. Observe the manufacturer's instructions.
– Do a test by pulling both sides of the car seat to ensure that it is
properly anchored.
Child seats with the ISOFIX and Top Tether* attachment system are available

from Technical Services.
Top Tether retainer straps*
Some child restraint seats have a third Top Tether anchoring
point, apart from both "ISOFIX" anchoring points, which al-
low better child retention.
Practical Tips
Child safety

Fig. 33 Position of the
Top Tether rings on the
back of the rear seat

Technical specifications
55