260
Fuses and bulbs
Remove the bulb holder
The rear lid must be open to change the bulbs.
– Remove the rear lid cover in the direction indicated
– Unlock the retaining tabs
direction of arrows
– Remove the bulb holder by turning it in the direction of arrow
3
Changing bulbs
Fig. 146 Remove the
cover from the rear lid
– Lightly press the defective bulb into the bulb holder
, then turn it to the left
1
– Fit the new bulb, pressing it into the bulb holder and turn it to
the right as far as it will go.
– Use a cloth to remove any fingerprints from the glass part of the
bulb.
Fig. 147 Remove the
– Check that the new bulb works properly.
bulb holder
– Replace the bulb holder.
⇒ F ig.
146.
of the bulb holder, following the
A
⇒ F ig.
and
1
2
⇒ F ig.
147.
and remove it.
2
147.
Fig. 148 Position of the
bulbs in the bulb holder
⇒ F ig. 148