Seat Leon Owner's Manual page 237

236 Emergencies
Wheel covers*
The wheel covers must be removed for access to the wheel
bolts
Removing
– Remove the wheel cover using the wire hook
– Hook this into one of the cut-outs of the wheel cover.
Fitting
– Fit the wheel cover onto the wheel rim by pressing it firmly. Put
pressure initially on the point of the cut-out for the valve. Next
fit the rest of the hubcap
Removing the wheel bolt caps*
Removal
– Fit the plastic clip (vehicle tools) over the cap until it clicks into
place
Fig. 119 Remove the
complete hub cap
– Remove the cap with the plastic clip.
⇒ F ig.
119.

⇒ F ig.
120.
Fig. 120 Wheel: wheel
bolts with caps
