Jeep 1996 Grand Cherokee Service Manual page 79

3 - 34 DIFFERENTIAL AND DRIVELINE
DISASSEMBLY AND ASSEMBLY (Continued)
Fig. 41 Pinion Gear Depth Gauge Tools
(1) Install the pinion front bearing cup with
Installer D–144 and Handle C–4171 (Fig. 42).
Fig. 42 Pinion Front Bearing Cup Installation
(2) Install the bearing cup with Installer D–146
and Driver Handle C– 4171 (Fig. 43). Ensure cup is
correctly seated.
(3) Assemble Pinion Gauge Set, Pinion Block and
pinion bearings. Install assembly into differential
pinion gear bore and hand tighten cone (Fig. 44).
(4) Place Arbor Disc 6732 on Arbor D–115–3 and
position in the bearing cradles (Fig. 45). Install dif-
ferential bearing caps on Arbor Discs and tighten
caps snug only.
Arbor Discs have different steps to fit other
axle sizes. Pick correct size step for axle being
serviced.
Fig. 43 Pinion Rear Bearing Cup Installation
Fig. 44 Pinion Height Block
Fig. 45 Gauge Tools In Housing
ZJ