Jeep 1996 Grand Cherokee Service Manual page 45

2 - 16 SUSPENSION
REMOVAL AND INSTALLATION (Continued)
TRACK BAR
REMOVAL
(1) Raise and support the vehicle.
(2) Remove the bolt and nut from the frame rail
bracket (Fig. 5).
(3) Remove the bolt from the axle tube bracket
(Fig. 5). Remove the track bar.
Fig. 5 Rear Track Bar
INSTALLATION
(1) Install the track bar to the axle bracket and
install a new bolt.
(2) It may be necessary to pry the axle assembly
over to install the track bar. Install the track bar to
the frame rail bracket. Loosely install the bolt and
flag nut.
(3) Remove the supports and lower the vehicle.
(4) Tighten the track bar bolts 100 N·m (74 ft.
lbs.).
SPECIFICATIONS
TORQUE CHART
DESCRIPTION
Shock Absorber
Upper Nut . . . . . . . . . . . . . . . . .70 N·m (52 ft. lbs.)
Lower Nut . . . . . . . . . . . . . . . . .92 N·m (68 ft. lbs.)
Suspension Arm Upper
Nuts . . . . . . . . . . . . . . . . . . . . .75 N·m (55 ft. lbs.)
Suspension Arm Lower
Nuts. . . . . . . . . . . . . . . . . . . .177 N·m (130 ft. lbs.)
Stabilizer Bar
Clamp Bolt . . . . . . . . . . . . . . . .54 N·m (40 ft. lbs.)
Link Nut . . . . . . . . . . . . . . . . . .36 N·m (27 ft. lbs.)
Track Bar
Frame Bracket Nut . . . . . . . . .100 N·m (74 ft. lbs.)
Axle Bracket Bolt . . . . . . . . . .100 N·m (74 ft. lbs.)
ZJ
TORQUE