Jeep 1996 Grand Cherokee Service Manual page 103

3 - 58 DIFFERENTIAL AND DRIVELINE
REMOVAL AND INSTALLATION (Continued)
(8) Remove the collapsible preload spacer (Fig. 29).
Fig. 29 Collapsible Spacer
(9) Remove the inner bearing from the pinion with
Puller C–293PA and Adapter C–293–39 (Fig. 30).
Place adapter rings so they do not damage
the bearing cage.
Fig. 30 Inner Bearing Removal
(10) Remove the depth shims from the pinion gear
shaft. Record the thickness of the depth shims.
PINION GEAR INSTALLATION
(1) Install the pinion rear bearing cup with
Installer C—4308 and Driver Handle C–4171 (Fig.
31). Ensure cup is correctly seated.
Fig. 31 Pinion Rear Bearing Cup Installation
(2) Install the pinion front bearing cup with
Installer D–129 and Handle C–4171 (Fig. 32).
Fig. 32 Pinion Front Bearing Cup Installation
ZJ