Jeep 1996 Grand Cherokee Service Manual page 189

5 - 40 BRAKES
REMOVAL AND INSTALLATION (Continued)
Fig. 13 HCU Brakeline Connections
Fig. 14 HCU And Bracket
(10) Remove mounting bolts attaching mounting
bracket to HCU (Fig. 15).
(11) Separate bracket from HCU (Fig. 16). Note
that special shoulder bolts are used to attach
bracket to HCU. If bolts are damaged, do not
use substitute bolts. Use factory replacement
bolts only.
(12) Inspect rubber isolators and sleeves in HCU
bracket. Replace any washers or isolators if missing,
or damaged with factory replacement parts only. Do
not use substitute fasteners.
INSTALLATION
(1) Transfer mounting bracket to new HCU. Use
original shoulder style bolts to attach bracket to
HCU; do not use substitute fasteners.
Fig. 15 HCU Bracket Bolts
Fig. 16 HCU Bracket Isolators And Sleeves
(2) Position stud plate on underside of panel and
secure it with new retaining nuts (Fig. 17).
Fig. 17 Stud Plate And HCU Bracket
ZJ