Maintenance And Service; Cleaning; Spot Vital Signs Lxi; Blood Pressure Cuff - Welch Allyn Spot Vital Signs LXi Service Manual

10

Maintenance and Service

Cleaning

Spot Vital Signs LXi

As necessary, clean the device with a cloth slightly dampened with either 70% isopropyl
alcohol, 10% chlorine bleach solution, or mild detergent in water, or use PDI Sani-System
Cloths. Never immerse Spot Vital Signs LXi in any type of fluid.

Blood Pressure Cuff

Before washing the Reusable Two-Piece Cuff, remove the two connectors and bladder,
close off tubes with plugs (available as accessory 5082-163), and close the hook and loop
fasteners. After washing, allow the cuff to air dry. Re-assemble the tube fittings.
Never press with an iron.

Blood Pressure Hose and Cable

Wipe the pressure hose with a damp cloth moistened in a mild detergent solution. Do not
immerse hose.
WARNING Before performing any maintenance or service to the Spot Vital
Signs LXi, disconnect the AC power line from the electrical outlet.
Caution Prevent water or other fluids from entering any connectors. If the
connectors get wet, dry them with warm air. Check all measurement functions.
Caution Do not sterilize or autoclave the Spot Vital Signs LXi device.
85