Welch Allyn Spot Vital Signs LXi Service Manual page 27

Service Manual
The liquid crystal display (LCD) may indicate any of the following: systolic blood pressure
(mmHg or kPa), diastolic blood pressure (mmHg or kPa), MAP (mmHg or kPa),
temperature (°F or °C), temperature mode, pulse rate, pulse signal level, SpO
department location, date, time, record number, height (in or cm), weight (lb or kg),
respiration rate, pain level, connectivity signal strength, and battery charge level.
Figure 4. Display Window
X
Systolic and Diastolic
display: if MAP is turned on,
the screen toggles between
the systolic and diastolic
values, and the word "MAP"
and the MAP value.
Temperature display and
indicator: shows the
temperature in Fahrenheit or
Celsius.
SpO display: shows the
2
percent saturation of arterial
hemoglobin. For devices with
SpO only.
2
Navigation Window:
shows menu options, error
messages, or temperature
conversion.
Pulse Signal Bar Graph: shows
the strength of the pulses detected.
Connectivity indicator: shows the
status of Spot LXi sending a wireless
reading.
Reading sent: indicates a
successful wireless send reading
attempt.
Reading not sent: indicates an
unsuccessful wireless send reading
attempt.
1 2
BP
{
SYS
mmHg
73
DIA
mmHg
{
TEMP
9
8
{
SpO2
%
{
Patient ID 0123456789
Weight
Height
Respiration
Pulse display: shows the pulse
rate.
Location identifier: shows
where the device belongs. If no
location is entered, this area
displays the date.
7
4 WEST
AM
Reading
01
5
F
PULSE /min
62
Pain
Clear
Send/Next Reading
Enter
Overview
percent,
2
Clock: shows the current time.
Reading number indicator:
shows what reading the device is
on. Spot Vital Signs LXi retains
up to 50 readings in memory.
Battery level indicator: shows
the battery charge level.
Thermometer probe setting
indicators: shows temperature
mode. For devices with SureTemp
Plus thermometer only.
Thermometer probe setting
indicators: shows Monitor
Mode. For devices with SureTemp
Plus thermometer only.
Out-of-range indicator: shows
the patient's temperature reading
above or below the measurement
range limits. For devices with
SureTemp Plus thermometer only.
Clinician ID icons:
The figure icon signifies that Spot
Vital Signs LXi requires the clinician to
enter the Clinician ID.
The check mark signifies Spot Vital
Signs LXi has recorded the Clinician
ID.
For devices with a bar code scanner
only.
17