Wireless Radio; Mechanical; Configuration Options - Welch Allyn Spot Vital Signs LXi Service Manual

Hide thumbs Also See for Spot Vital Signs LXi:
Table of Contents

Advertisement

80
Specifications

Wireless Radio

Wireless Network Interface
Frequency
Channels
Security
Antenna
Power Input
Wireless Data Rates
Management
Agency Approvals
IP addresses
Protocols
Data Transfer Protocols
Network
ACK

Mechanical

Dimensions
Mounting
Operating Temperature
Storage Temperature

Configuration Options

DHCP Enabled or Not
Encryption
WPA Pass Phrase
WEP Key 1-4
SSID
Integrated Omni-directional RP-SMA +3dBi antenna
11 Mbps during vitals transmission only (approximately two seconds per reading)
Wireless access points do not assign IP addresses
Centraled DHCP Server for dynamic IP Address/Subnet/Gateway assignment
The Spot Vital Signs LXi Wireless Radio communicates to a software component
which must be on the same sub-net as the radio APs.
Data is deleted from device only after an acknowledgement is received from
Welch Allyn Spot Vital Signs LXi
IEEE 802.11b DSSS, WiFi Compliant
2.4 to 2.4835 GHz
11 US/Canada, 13 Europe, 14 Japan, 4 France
WEP (64 & 128 bit), WPA (PSK & TKIP)
From Spot Vital Signs LXi serial port
Device Discovery
US: FCC Part 15 , Class B, C/UL, CE
Canada: RSS-210
UDP,DHCP,TCP/IP
3.93" L x 2.38" W x 1.42" T
99.78mm L x 60.5 mm W x 36.1mm T
-40° C to +125° C
• Subnet Address
WEP Authentication
Europe: CE
Fixed IP
TCP/IP
Connex.
Nylon Bracket
-40° C to +85° C
If not DHCP:
• IP Address
• Gateway
• WEP
• WPA
Channel
Default WEP Key

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lxi

Table of Contents