Braun Thermoscan Pro 4000; Printer - Welch Allyn Spot Vital Signs LXi Service Manual

Service Manual

Braun ThermoScan PRO 4000

Welch Allyn supplies a rechargeable battery pack with the Braun ThermoScan PRO 4000
thermometer.
1. Open the battery compartment.
2. Remove the battery pack and replace with a new battery pack, verify the poles are in
the right direction.
3. Slide the battery door back in until it snaps into place.
If the battery is completely discharged, the LEDs will not illuminate. Allow the unit to
charge at least 15 minutes before proceeding.

Printer

1. Open the battery compartment.
2. Remove the battery pack and replace with a new battery pack, verify the poles are in
the right direction.
3. Slide the battery door back in until it snaps into place.
Allow the printer to charge at least 15 minutes before proceeding.
Caution Do not use alkaline batteries in the Braun ThermoScan PRO 4000
thermometer.
The battery is a rechargeable battery and must be recycled or disposed
of properly according to national or local regulations.
Caution Do not use alkaline batteries in the printer.
The battery is a rechargeable battery and must be recycled or disposed
of properly according to national or local regulations.
Maintenance and Service 89