Booklet Tray; Right Cover; Left Cover - Riso ComColor 9050 Basic Manual

Finisher
If you connect the optional multifunction finisher, you can staple or punch the printed paper or create a booklet.
① Top Tray
The printouts are output here when punching is performed.
② Stacking Tray
The printouts are output here when the staple or offset
output function is used.
③ Eject Button
Use this button to move the printouts in the booklet tray to
the position where you can easily retrieve them.
Backlight OFF and Sleep Status
When the machine is not operated for a certain period of time, it automatically enters power saving mode depending on
how the administrator has configured the settings.
● Backlight OFF
The status when the touch panel is off and the [Wake up] key lights up. In this case, normal status is restored
immediately after an original is loaded in the scanner or the [Wake up] key on the operation panel is pressed.
●
Sleep Status
The status when the touch panel is off and the [Wake up] key lights up. Press the [Wake up] key to restore. This takes
longer to restore than from backlight OFF.
0

④ Booklet Tray

Booklets and 2-fold printouts are output here.

⑤ Right Cover

Open to replace the staple cartridge or if paper is jammed.

⑥ Left Cover

Open to remove the jammed paper from the paper feed
path between the printer and the finisher.
ComColor Series Basic Guide 02