Wired Remote Control / Rcs-Sh80Ag; I How To Use The Wired Remote Controller - Sanyo SPW-CR365GXH56 Technical Data Manual

3. Wired Remote Controller
Wired Remote Controller / RCS-SH80AG

I How to Use the Wired Remote Controller

O: Remote control sensor
J: TIMER SET button
K: Time setting buttons
G: CHECK button
3
N: VENTILATION button
F: FILTER button
A: ON/OFF operation button
B: Operation lamp
C: MODE button
D: Temperature setting
buttons
E: FAN SPEED selector button
This remote control unit can be used to operate up to 8 indoor units.
●
Once the operation settings are made, the units can be operated by
simply pressing the ON/OFF operation button.
In the SPW-AS, U, D, F and FM series, the flap position is not shown on
●
the display.
The SPW-DR764/964GXH56 does not have a dry function.
●
L: SET button
M: CL button
This button is for turning the air conditioner on and off.
This lamp lights when the air conditioner is turned on.
This lamp blinks when an error occurs or a protective device is activated.
Use this button to select one of the following 5 operating modes.
(AUTO) : Used to automatically set cooling or heating operation. Only for single
heat pump type.
(HEAT) : Used for normal heating operation. Only for heat pump type.
(DRY) : Used for dehumidifying without changing the room temperature.
(COOL) : Used for normal cooling operation.
(FAN) : Used to run the fan only, without heating or cooling operation.
: Press this button to increase the temperature setting.
: Press this button to decrease the temperature setting.
(AUTO) : The air conditioner automatically decides the fan speeds.
(HI) : High fan speed
(MED) : Medium fan speed
(LO) : Low fan speed
Control of Mini ECO-i SYSTEM
H: UNIT button
I: FLAP button
3 - 26
B: Operation lamp
A: ON/OFF operation button
E: FAN SPEED selector
button
C: MODE button
D: Temperature setting
buttons
(T emperature range: 17 to 27°C)
(T emperature range: 16 to 30°C)
(T emperature range: 18 to 30°C)
emperature range: 18 to 30°C)
(T