7. Remote Sensor
Remote Sensor / ART-K45AG
I Parts Supplied with Remote Sensor
No.
Remote sensor
1
(comes with 200 mm wire)
Machine screws
2
M4 × 25 mm
Wood screws
3
3
Spacers
4
Wire joints
5
6
Clamp
7
Installation manual
I Remote Sensor Installation Guidelines
Place of installation
• Mount the remote sensor at a height of 1 to 1.5 meters above the floor
where it can sense the average temperature of the room.
• Do not mount the remote sensor in a place exposed to direct sunlight or a place
exposed to outside air such as near a window.
• Do not mount the remote sensor behind an object so that it is separated from the
air circulation of the room.
• Mount the remote sensor within the room being air conditioned.
• The remote sensor must be mounted on the wall or other surface vertically.
Supplied parts
Control of Mini ECO-i SYSTEM
Q'ty
1
2
2
2
2
1
1
3 - 94